11
MOUNTING THE SCREEN
Your new OZ THEATRE SCREEN is now ready to mount. In your accessories pack you will find
4 heavy duty mounting brackets with 2 wall screws.
You will need to drill the brackets into wall studs either side of the centre of the screen frame.
You will need the following tools as stated in the front of this manual;
Drill, battery operated or electric
1/8 drill bit
A level
Tape measure
Phillips head bit (recommended) or screw driver.
If your screen is supplied with 4 mounting brackets. You will have 2 mounting points -
double up
the brackets by sitting one on top of the other, this gives the brackets extra strength.
They will both need to be screwed into a stud either side of the centre of your screen.
See diagram below.
DO NOT USE WALL ANCHORS INTO GYPROCK!
WALL
Acceptable stud locations for hanging brackets.
CENTRE
1. Note there are 2 mounting positions on the back of the
frame. The option on the right side here is recommended
as the standard and the left one for applications where
space above the screen is tight and limited.
WALL
