USER MANUAL Model No: 3576
2.
To attach the pedal to the rotary arm, align
the screw section of the pedal to the hole in
the rotary arm and rotate the nut (found
attached to the side of the pedal) to secure the
pedal into the rotary arm. Make sure you
tighten it into the rotary arm correctly to avoid
the pedal becoming loose easily.
1.
Place a base stand over one of the ends of the mini exercise bike, ensuring that the holes in the base
stand align with the holes in the mini exercise bike. After this, place a washer over the hole (as seen in
the image to the top left) and screw the hex cap screw through the baste stand and into the bottom of
the mini exercise bike (as seen in the image to the top right). Repeat this for the other hole in the base
stand. Once done, repeat this step on the opposite side of the mini exercise bike.
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
