3
USING FLEXPACKS
The
DOUBLE
FLEX
™
comes with
one 5 lb-rated FlexPack permanently
attached and two attachable 5 lb-rated
FlexPacks. The
DOUBLE
FLEX
™
will
produce resistance levels of 5, 10
and 15 lbs of smooth isotonic linear
resistance.
ADDING FLEXPACKS:
Hold the center of the
DOUBLE
FLEX
™
as shown in the above photo. Hold the
FlexPack so the SpiraFlex
®
logo is at
the top, line up the black arrow on the
edge of each FlexPack and push while
twisting right to lock.
REMOVING FLEXPACKS:
Hold the center of the
DOUBLE
FLEX
™
as shown in the above photo. Hold the
FlexPack with your other hand and twist
right while pulling FlexPack away from
DOUBLE
FLEX
™
.
DO NOT OPERATE THE
DOUBLE
FLEX
™
UNLESS YOU HAVE CHECKED THAT THE
FLEXPACKS ARE FULLY ENGAGED AND LOCKED. ONLY ATTACH FLEXPACKS WHEN
DOUBLE
FLEX
™
IS IN THE FULL OPEN RESTING POSITION. NEVER ATTTEMPT
TO USE MORE THAN THREE FLEXPACKS, AS SERIOUS INJURY MAY OCCUR AND
PRODUCT MAY BE DAMAGED.