OXTS Survey+ v3 Скачать руководство пользователя страница 68

Страница: 68 / 103

Oxford Technical Solutions

PPS / Triggers tab

PPS will output 1 pulse per second synchronised to GPS time, providing a highly accurate

time pulse for synchronising external devices.

The output trigger on the digital I/O generates a pulse based on distance. Select the distance

interval to generate the pulses on from the dropdown list, or type in a value. The output has

0.8 V or less for a low and 2.4 V or more for a high. The pulse width is 1 ms.

NAVconfig Environment section

This section contains settings related to the environment you will be collecting data in,

including the device initialisation conditions. This section is not broken down into tabs but

contains several selectable options and pre-defined values on one screen.

Initialisation

Static initialisation is disabled by default.

If static initialisation has not been enabled, the will need to be initialised by

driving forwards in a straight line to initialise the heading to the track angle. The

initialisation speed is the speed at which the vehicle must travel to activate the initialisation.

The default initialisation speed is 5 m/s. However, some slow vehicles cannot achieve this

speed. For these vehicles adjust the initialisation speed to a different value. In contrast, some

faster vehicles will achieve much higher speeds and will have an unstable heading at lower

speeds e.g. Formula 1 cars, so a higher initialisation speed should be set here.

If a speed less than 5 m/s is selected, then care should be taken to make sure that the

is travelling straight when it initialises.

Vehicle starts

Select a predefined value from the dropdown list.

If you know the vehicle will be level when starting (to within about 5°) select ‘Level’. This

saves about 40 s during the initialisation process since the does not have to take the

time to compute an initial roll and an initial pitch. In high vibration environments

Not Level

may not work and so the can only start if the vehicle is level and the

Level

option has

been specified.

Содержание Survey+ v3








































































































Результаты поиска

Содержание Survey+ v3

Отзывы:

Похожие инструкции для Survey+ v3

Бренды по названию

Популярные бренды

OXTS Survey+ v3, Руководство пользователя

Результаты поиска

Содержание Survey+ v3

Отзывы:

Похожие инструкции для Survey+ v3

Бренды по названию

Популярные бренды