OXTS Survey+ v3 Скачать руководство пользователя страница 65

Страница: 65 / 103

Revision: 190902

RT-Range User Manual

Wi-Fi tab

In the Wi-Fi setting you can configure the system to either be an Access Point or

to connect to an existing network.

Access Point

To configure the Wi-Fi as an Access Point, click on the option and the field to configure

the Network details and router details will become available to edit.

The Network name (SSID) will be by default OxTS SN[serial number]. This

can be changed to another name but cannot contain any of the following characters: [<],

[>], [&], ['] and ["]. It is possible to add a password to the network created. To enable

this, select what security protocol to use, WPA or WPA2, and then enter the Passphrase.

For the router, the Gateway and Subnet mask can be changed if using a different IP range

or to prevent IP clashes.

Connect to existing Network

To Configure the Wi-Fi to connect to an existing WLAN, you will need to have the Wi-

Fi already enabled and have the Access Point disabled. If the Wi-Fi is not enabled, the

will not be able to see what network it could connect to. If the Access Point is

enabled, the

will not connect to an existing network.

Under “

Wireless networks in range of device”,

you can choose which network you wish

to connect the to and drag the network to the box on the right. If the network is

secured, a text box will be available to enter a password. This will contain the networks

that the will connect to when they are in range.

Warning:

A network containing the following characters, [<], [>], [&], ['] and ["], will not be seen

correctly and the will not be able to connect to the device. These characters

cannot be used in the SSID of the .

If using an iPhone to hotspot, please be aware if the phone is called "[name]'s iPhone" as

this has the non-usable [']. To change the name of the hotspot, go to "Settings" >

"General" > "About" and select "Name".

Содержание Survey+ v3








































































































Результаты поиска

Содержание Survey+ v3

Отзывы:

Похожие инструкции для Survey+ v3

Бренды по названию

Популярные бренды

OXTS Survey+ v3, Руководство пользователя

Результаты поиска

Содержание Survey+ v3

Отзывы:

Похожие инструкции для Survey+ v3

Бренды по названию

Популярные бренды