VZR.247800.001
IM
Turnstile CUBE C-03
Installation Manual
12
4.2.4
– cable routing is exercised through hole (1) at the lower
turnstile stand plate.
4.2.5
Lay the PU connection cable, PSU cable and, if provided, the
ACS and OPS cables in the cable conduit or chase.
4.2.6
Install the turnstile stand onto the prepared site.
4.2.7
Route the cables from the CP, PSU and, if necessary, ACS and
SFAS cables into the turnstile body.
Secure the cables with cable ties.
The turnstile stand has a removable stainless steel plate (2) for quick
access to the place where control cables are laid down. To remove the plate,
undo screw (1) and slide the plate up.
Figure 5
– Dismounting of the removable plate of the turnstile stand
1 - screw; 2 - removable plate