Oxford Oximiser 3X, Руководство пользователя

Страница: 7 / 56

7
GB
Oximiser 3X User Manual
voltage to a level, in a much shorter period, so that the vehicle can be started
Standard Equipment and Optional Accessories
The OXFORD Oximiser3X is provided as standard with:
i. A mains power cord which can be replaced should it become damaged.
ii. Connection leads with fused ring lead connection for permanent battery connection complete with a
weather proof rubber cap
iii. Connection leads with crocodile battery clamps for easy short term connection
iv. Wall bracket and fixing screws
Optional accessories are also available as follows:
v. Part OF702 – Connection lead with crocodile battery clamps
vi. Part OF703 – Connection lead with fused ring leads battery connectors and weather proof rubber cap
vii. Part OF704 – Connector lead with cigarette accessory plug lead
viii. Part OF705 – 3 meter output extension lead
ix. Part EL100 – Din/SAE socket for small diameter 12V plugs
x. Part EL101- Standard 12Volt socket
Specification
Declaration of Compliance
Designed and manufactured by OXFORD PRODUCTS Ltd to the highest specifications.
The Oximiser3X conforms to the following standards dependant on which countries each charger is sold in:
o TUV/GS+CE EN60335-1:2012, EN60335-2-29:2004+A2:2010 + CB SCHEME VARIATIONS for Europe
o EN62233:2008: PPP76001B:2012 inc ZEK 01.4-08 for Europe
o EN55014-1:2006/A2:2011, EN55014:1997/A2:2008 for Europe
o EN61000-3-2:2006/A2:2009, EN61000-3-3:2008 for Europe
o NRTL : UL1236:2009:CAN/CSA-C22.2. No.107.2-01:2003 for Canada and USA
o SAA & RCM for Australia and New Zealand
o LOA for South Africa
Voltage AC 220-240V~ AC, 50-60 Hz, 70W
Charging Current 0.8 Amps rms to 3.60 Amps rms
Charging Voltage Nominal 14.4V or 14.7V
Normal Ambient Operating Temperature 21˚C
Cooling Vented outer case
Charger type Class 2 battery charger
Maximum dimensions 154mm x 105mm x 45mm
Weight 0.4kg