Oxford Instruments X-MET8000 Series, Руководство оператора

Страница: 14 / 121

Take The First Measurement
The X-MET8000 series has factory settings which are applicable to many measurements. It is a good
idea to give each sample a name, because it is easier to find it in the results history if it has one.
Follow these instructions to take the first measurement.
Remember that the ‘Safe, Accurate Measurements With The X-MET8000 Series’ manual contains
important safety information, as well as guidance for accurate measurements.
Switch On The X-MET8000 Series
Take the X-MET8000 series out of the transit case, verify that there is a battery in the X-MET8000
series and that the battery has sufficient charge, then follow these steps to switch on the X-MET8000
series.
1. Press and hold the Power button until it is lit.
The X-MET8000 series powers on, and the Safety screen appears.
14
X-MET8000 Series Operator’s Manual
8