Oxford Instruments Andor iKon-L, Руководство по оборудованию, Страница: 18 / 43

Version 1.4 rev 23 Apr 2019
18
IKon-L
SECTION 3: INSTALLATION
WARNINGS:
• PRIOR TO COMMENCING INSTALLATION, THE USER SHOULD REFER TO THE SAFETY AND WARNING
INFORMATION AND UNPACKING INSTRUCTIONS AT THE BEGINNING OF THIS MANUAL.
• CABLES SHOULD BE ROUTED TO PREVENT ACCIDENTS, DAMAGE AND ACCIDENTAL UNPLUGGING WHILE
AVOIDING BEND RADII OF LESS THAN 30 MM.
• TEMPERATURE AND HUMIDITY MUST MEET THE SPECIFICATIONS DEFINED IN TECHNICAL SPECIFICATIONS.
• FOR HF, SO AND SY MODELS REFER ALSO TO SECTION 5 FOR MODEL SPECIFIC INFORMATION.
3.1 t
RanspoRt and
s
toRage
i
nfoRMation
• Storage Temperature: -30°C to 50°C.
• If it is to be stored after use at a temperature below the coolant freezing point, ensure that all liquid coolant has been
expelled from the camera.
3.2 f-
MoUnt
The standard iKon-L 936 model features a F-mount for easy attachment to a wide range of compatible lenses. Adapters
are also available for other lens fitments, refer to
Section 1.5.2
.
To Attach an F-mount Lens
1. Insert the lens into the mounting aperture, then rotate the lens counter-clockwise (~1/4 turn) until it clicks into
place, being careful to NOT press the lens release button.
2. Lock in place by rotating the secondary locking ring (if present) on the lens clockwise.
To Remove an F-mount Lens
1. Rotate the secondary locking ring (if present) counter-clockwise to unlock.
2. Press and hold the lens release button. While holding the lens release button, turn the lens clockwise (~1/4 turn)
until it stops. Then remove the lens.
3. As with all optical components handle them carefully and ensure they are protected from dust and other
contaminants that may impair performance.
Lens Release
button