4.Advanced User Guidebook
30
When the Type is selected as
Configure
, the menu is shown as the following
table:
Function Menu
Setting
Description
Function
Save
Display the save function menu
Type
Configur
e
Choose the saving type as configure.
Configure
Setting1
…..
Setting8
The setting address
Save
Save the current oscilloscope configure
to the internal storage
Load
Recall the configure from the selected
address
When the Type is selected as
Image
, the menu is shown as the following table:
Function Menu
Setting
Description
Function
Save
Display the save function menu
Type
Image
Choose the saving type as image.
Save
Save the current display screen. The
file can be only stored in a USB
storage, so a USB storage must be
connected first. The file name is
editable. The file is stored in BMP
format.
Save and Recall the Waveform
The oscilloscope can store 16 waveforms, which can be displayed with the current
waveform at the same time. The stored waveform called out can not be adjusted.
In order to save the waveform of CH1, CH2, CH3, CH4 and Math into the object
Wave0, the operation steps should be followed:
1. Turn on CH1, CH2, CH3, CH4 and Math channels.
2. Push the
Utility
button, select
Function
in the right menu, select
Save
in the
left menu. In the right menu, select
Type
as
Wave
.
3.
Saving
: In the right menu, select
Source
as
All
.
4. In the right menu, press
Object
. Select
Wave0
as object address in the left
menu.
5. In the right menu, press
Next Page
, and select
Storage
as
Internal
.
6. In the right menu, press
Save
to save the waveform.
7.
Recalling
: In the right menu, press
Prev Page
, and press
Object
, select
Wave0
in the left menu. In the right menu, select
Object
as
ON
, the waveform
