User’s Manual of
OWON
Colour Digital Storage Oscilloscope
Cursor Measurement
When carrying out the cursor measurement, the position of Cursor 1 can be adjusted
with the
CURSOR1 (VERTICAL POSITION)
knob of Channel 1, and that of
Cursor 2 can be adjusted with the
CURSOR2 (VERTICAL POSITION)
knob
of
Channel 2.
Perform the following operation steps for the voltage cursor measurement of the
channel CH1:
1.
Press
CURSOR
and recall the
Curs Meas
menu.
2.
Press the
F1
menu selection button to choose
Voltage
for Type, with two purple
dotted lines displayed along the horizontal direction of the screen, which
indicating
CURSOR1
and
CURSOR2
.
3.
Press the
F2
menu selection button and choose
CH1
for
Source
.
4.
Adjust the positions of
CURSOR1
and
CURSOR2
according to the measured
wave form, with the absolute value of the voltage amplitude difference between
Cursor 1 and Cursor 2 displayed in the increment window. The current position
of Cursor1 is displayed in the Cursor1 window and that of Cursor2 is displayed in
the Cursor2 window (see Fig. 51).
Fig. 51
Wave Form of Voltage Cursor Measurement
61
