User’s Manual of
OWON
Colour Digital Storage Oscilloscope
Fig. 3
Illustrative Drawing of Display Interfaces
1.
The Trigger State indicates the following information:
Auto: The oscilloscope is under the Automatic mode and is
collecting the waveform under the non-trigger state.
Trig' d: The oscilloscope has already detected a trigger signal and is
collecting the after-triggering information.
Ready: All pre-triggered data have been captured and the
oscilloscope has been already ready for accepting a trigger.
Scan: The oscilloscope captures and displays the waveform data
continuously in the scan mode.
Stop: The oscilloscope has already stopped the waveform data
acquisition.
2.
Waveform Viewing Area.
3.
The purple pointer indicates the horizontal trigger position, which can be adjusted
by the horizontal position control knob.
4.
The reading shows the time deviation between the horizontal trigger position and
the screen centre line, which equals 0 in the screen center.
5.
This reading shows the time deviation between the horizontal trigger position and
the window centre line, which is regarded as 0 in the window center.
6.
It indicates the current function menu.
14
