Owon MSO7102T, Руководство пользователя

Страница: 67 / 117

User’s Manual of
OWON
Color Mixed Signal Digital Storage Oscilloscope
Type OFF
Voltage
Time Switch off the cursor measurement.
Display the voltage measurement cursor and
menu.
Display the time measurement cursor and menu.
Source CH1, CH2 Choose the channel generating the waveform to
which the cursor measurement will be applied.
Delta Read the difference between cursors.
Cursor 1 Read the position of Cursor 1 (the Time is read
with reference to the horizontal trigger position
and the Voltage is to the ground point).
Cursor 2 Read the position of Cursor 2 (the Time is read
with reference to the horizontal trigger position
and the Voltage is to the ground point).
Cursor Measurement
When carrying out the cursor measurement, the position of Cursor 1 can be adjusted
with the
CURSOR1 (VERTICAL POSITION)
knob of Channel 1, and that of
Cursor 2 can be adjusted with the
CURSOR2 (VERTICAL POSITION)
knob of
Channel 2.
Perform the following operation steps for the voltage cursor measurement of the
channel CH1:
1. Press
CURSOR
and recall the
CURS MEAS
menu.
2. Press the
F1
menu selection button to choose
Voltage
for Type, with two purple
dotted lines displayed along the horizontal direction of the screen, which
indicating
CURSOR1
and
CURSOR2
.
3. Press the
F2
menu selection button and choose
CH1
for
Source
.
4. Adjust the positions of
CURSOR1
and
CURSOR2
according to the measured
waveform, with the absolute value of the voltage amplitude difference between
Cursor 1 and Cursor 2 displayed in the increment window. The current position
of Cursor1 is displayed in the Cursor1 window and that of Cursor2 is displayed in
the Cursor2 window (see Fig. 58).
67