5
.Menu Interpretation
45
Searches the peak with the minimum amplitude on the trace and
identifies it with a marker.
5.6.4.6 [Mkr
→
CF]
Used to move the peak point to the center frequency point.
5.6.4.7 [Cont Max On Off]
Enables or disables the Cont Max search, the default is Off. When
enabled, the system will always execute a peak search
automatically after each sweep in order to track the signal under
measurement.
5.7
【
Trace
】
hardkey
Key access:
Press
Shift key, then
Trace
hardkey (
7
in
numeric keypad
).
As the sweep signal is displayed as a trace on the screen, you
can set parameters about the trace using this key. The analyzer
allows for up to five traces to be displayed at one time. Press this
key to access the menu for trace. It includes [Trace 1 2 3 4 5],
[Clear Write], [Max Hold], [Min Hold], [Blank], [View],
[Operations
►
],
[ 1 ↔ 2]
, [ 2-
DL → 2]
, [
2 ↔ 3]
,
[ 1 → 3] and [ 2
→ 3]
.
5.7.1 [Trace 1 2 3 4 5 ]
Select trace, the analyzer offers 1,2,3,4,5 trace. The selected trace
number in the menu will be underlined.
5.7.2 [Clear Write]
Erase the trace data, and updates current display during following
sweeps of the analyzer.
5.7.3 [Max Hold]
Maintains the maximum for each point of the trace, and updates
