Operation
UNIT 2
Single-mode Light Source
1 - Connect the BOLT to the fiber you are testing via a
patch cord as shown at right.
2 - Connect a power meter (such as the Fiber OWL) to
the other end of the fiber you are testing via a patch cord
as shown at right.
3 - Power on the BOLT to continuous wave / light source
mode by flipping the switch to CW. Allow the BOLT to
stabilize for 2 minutes before taking measurements with
the power meter.
2-2
Patch
Cord
Fiber
Link
Single-mode Light Source
To power
meter
