background image

 

INTRODUCTION

 

Congratulations and thank you for purchasing the OWI CRS-201

 

Infrared Wireless Microphone System. 

This compact system is suitable for Classrooms, Training rooms, Conference rooms and for Public 
speaking. 
 
The CRS System is an Infrared (IR) Wireless system that allows the speaker the freedom to move about 
the room without the restriction of a microphone cable. The two included CRS-IRS IR Sensors allow use 
of several options of microphones. 
 
The CRS-201-CASE is an amplified audio mixer that provides inputs for infrared wireless microphones, 
two unbalanced mono 

¼” phono jacks and a stereo RCA line level audio source. The internal amplifier is 

a clean, powerful 30 watts per channel in a dual mono configuration (i.e. the system outputs the same 
mono signal to up to two speakers). 
 
The CRS-PMIC is a combination IR Wireless PENDANT MICROPHONE AND BATTERY CHARGER. It 
gets clipped onto a coat or shirt pocket, or hung around the presenter’s neck on a lanyard and is then 
used as a wireless microphone allowing for a hands free presentation. 
 
The CRS-PMIC also features a MIC Input that connects to either of the optional CRS-LMIC LAPEL 
MICROPHONE or optional CRS-HSMIC HEADSET MICROPHONE. These two ultra-sensitive mics 
provide additional options for hands-free presentations. 
 
The IR Wireless 

Microphones are similar to ‘normal’ mics in how they detect speech, but rather than 

directly connecting to a PA or other amplifier, they convert the audio signals into very strong IR pulses 
(invisible light pulses) that are ‘seen’ by the IR Sensors. The Sensors receive these pulses and output 
electrical pulses to the CRS-201-CASE, where the electrical pulses are converted back to audio signals, 
amplified and output to the speakers. 
 
IR is invisible light and IR systems typically require a direct line-of-sight from the transmitter (microphone) 
to the receiver (IR Sensors) to operate. The CRS-201 was designed with ultra-high output IR circuitry that 
allows the IR pulses output from the microphones to reflect off ceiling, wall and hard floor surfaces. The 
IR Se

nsors are designed to ‘see’ IR from any direction, allowing uninterrupted presentations. 

 
The CRS-HHMIC2 Wireless Microphone (optional) is a HAND-HELD IR WIRELESS MICROPHONE. This 
option can be used by the speaker for presentation or can be passed around the classroom or audience 
to allow questions to be clearly heard by all. 
 
The CRS-201 System is easy to install and operate. Once set up, it will be ready for class every day. One 
important point: Just as students need sleep to re-charge, the microphone batteries need to be kept at 
peak performance levels as well, so it is important to re-charge the batteries before each use. 
 
When not in use, the CRS-201-CASE provides a secure, locking storage space for the Pendant, Lapel 
and Headset Microphones, so they will never get misplaced. 
 
The CRS-201 

when combined with OWI’s P5278 Bookshelf or IC5 or IC6 in-ceiling speakers help create 

professional easy to hear presentations of both spoken content and audio from external sources such as 
CD/DVD players, Computers, Cable, Satellite, VCR, etc. 
 
OWI CRS-201 Infrared Wireless Microphone System. Always at the head of the class. 

Содержание CRS201
























Отзывы: