16
Figure 14. Typical CRS System Connections
CONNECTIONS
The CRS-201 System requires only a few simple connections and sets up in minutes. The only required
connections are the
IR Sensors
,
Speakers
and
Power Cord
. Connecting an optional audio source such
as a CD/DVD Player, VCR, Computer, Projector, Cable, Satellite, etc is also simple using standard RCA-
RCA audio patch cables.
IR Sensors
1.
Connect the
CRS-IRS IR Sensor mini plugs
to any two of the three
IR Sensor Inputs
on the
CRS-201-CASE Top Panel
.
Speakers
1.
Strip
approximately ¼” off each lead and twist the ends so there are no loose strands that can
cause shorts. The recommended speaker wire size is 14 to 16 gauge.
2.
Connect to the appro and
– Speaker Terminal. Maintain polarity from the speaker.
NOTE:
Though the CRS has Left and Right Line Inputs, the Speaker Outputs are mono, so BOTH
channels will be output from BOTH speakers.
