18
OPERATION
1.
IF TURNING THE SYSTEM ON FOR THE FIRST TIME, turn the
VOL Knobs
all the way down (full
counterclockwise).
2.
With all system connections confirmed, press the
Power Switch
to turn the system
ON
.
3.
If using the
Lapel
or
Headset Mic
, connect to the
Pendant
as shown in
Figure 16
. Be sure the
Pendant
is pointing toward the
IR Sensors
so the
IR Pulses
from the
Pendant
will be ‘seen’ by the
IR Sensors
.
4.
Turn the
Hand Held Microphone
(or
Pendant
)
ON
.
5.
Set the
MAIN VOL Knob
on the
CRS-201-CASE
to
12
o’clock
.
6.
Slowly raise the
WIRELESS VOL
level until the output from the
Speakers
is set to the desired level.
If feedback occurs (audio squeal from the speakers) lower the
WIRELESS VOL
level or move the
microphone
away from the
speaker
.
7.
Repeat
Step 6
for any
audio device(s)
connected to
LINE IN, TV/DVD
and
COMP,
and adjust the
LINE IN,
TV/DVD
and
COMP
levels as needed.
8.
Confirm the
relative volume
of the
microphone(s)
to the
audio device(s)
and adjust if necessary.
(The audio from the
microphone(s)
should be heard
above
the audio from the
device(s)
connected
to
LINE IN, TV/DVD
and
COMP
.)
9.
Adjust the
MAIN VOL
as appropriate so the
microphone(s)
and
audio device(s)
can be clearly
heard throughout the entire room. (Set to the highest comfortable listening level to avoid listener
fatigue.)
