06
DEVICE SETUP
6. Hold the drive against its post, then use the drive post
screw to affix the drive in place.
7. Re-seat the cover removed in Step 3A so that it sits flush
on the chassis, then re-affix the four
screws that were also removed in that step.
8. Once completed, the OWC U.2 ShuttleOne is now ready for installation in the host. Please consult the manuals
for the following OWC products that are compatible with the ShuttleOne: ThunderBay Flex 8, Helios 3S
with U.2 Interchange system, or Mercury Pro U.2 Dual enclosure. If you’re using a PC or other enclosure
please refer to the manufacturer instructions for installing 2.5 inch U.2 drives for further assistance.
7
6
