U.2 NVMe Interchange System for Mercury Helios 3S
Device Setup
8
14. Re-fasten the two captive thumbscrews you
loosened in Step 1.
13. Again set the combined inner chassis and outer case
on their side, then slide them into the outer enclosure
of the Mercury Helios 3S, until the front grill is flush
with the edge of the enclosure.
15. Take the drive tray, oriented as shown, and carefully
slide it into the back of the Mercury Helios 3S. Once
the connector on the tray is fully seated, the edge
of the tray should be flush with the edge of the
Mercury Helios 3S.
