➆
Type
exit
and hit enter.
➇
Close the command prompt window.
You may now proceed with formatting the drive.
If your OWC Mercury Elite-AL Dual was formatted for use on a
Macintosh, it will not be readable by Windows without special
software. If you wish to use your storage solution on a computer
running Windows, you will need to repartition and reformat using the
following instructions.
➀
Go to the DOS command prompt by
selecting “Run” from the Start Menu.
➁
Type in
cmd
in text box, and hit
the“OK” button.
➂
Type
diskpart
and hit enter.
➃
Type
list disk
and hit enter.
➄
Type
select disk x
replacing
x
with the number of the disk you want
to reformat. (Typically, you will see an asterisk (*) under “GPT” for the
disk requiring formatting.)
➅
Type
clean
and hit enter.
WARNING: The
clean
command will destroy ALL data on the disk you run it on!!! Be sure there is
nothing you need to keep on your drive before running any of these commands.
3.2 Removing the GUID Partition Scheme
Only for XP, 2000, ME and earlier. (XP 64-BIT, Vista & Windows 7 can continue to the next section)
OWC Mercury Elite-AL Pro Dual
Chapter 3 - Formatting
