OVS LTN8608-P8 Скачать руководство пользователя страница 48

Страница: 48 / 231

User Manual of Network Video Recorder

No.

Name

Description

A Button

Same as A/FOCUS+ button on front panel.

REC Button

Same as REC/SHOT button on front panel.

PLAY Button

Same as the PLAY/AUTO button on front panel.

INFO Button

Reserved.

VOIP/MON Button

Same as the MAIN/SPOT/ZOOM- button on front panel.

MENU Button

Same as the MENU/WIPER button on front panel.

PREV Button

Same as the PREV/FOCUS- button on front panel.

DIRECTION/ENTER Buttons

Same as the DIRECTION/ENTER buttons on front panel.

PTZ Button

Same as the PTZ/IRIS- button on front panel.

ESC Button

Same as the ESC button on front panel.

RESERVED

Reserved for future usage.

F1 Button

Same as the F1/LIGHT button on front panel.

PTZ Control Buttons

Buttons to adjust the iris, focus and zoom of a PTZ camera.

F2 Button

Same as the F2/AUX button on front panel.

Troubleshooting Remote Control:

Make sure you have installed batteries properly in the remote control. And you have to aim the remote control

at the IR receiver in the front panel.

If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.

Steps:

Go to Menu > Settings > General > More Settings by operating the front control panel or the mouse.

Check and remember NVR ID#. The default ID# is 255. This ID# is valid for all the IR remote controls.

Press the DEV button on the remote control.

Enter the NVR ID# you set in step 2.

Press the ENTER button on the remote.

If the Status indicator on the front panel turns blue, the remote control is operating properly. If the Status

indicator does not turn blue and there is still no response from the remote, please check the following:

Batteries are installed correctly and the polarities of the batteries are not reversed.

Batteries are fresh and not out of charge.

IR receiver is not obstructed.

If the remote still can’t function properly, please change a remote and try again, or contact the device provider.

User Manual

Содержание LTN8608-P8








































































































































































































































Результаты поиска

Содержание LTN8608-P8

Отзывы:

OVS LTN8608-P8, Быстрый старт, Страница: 48 / 231

Результаты поиска

Содержание LTN8608-P8

Отзывы: