OVS LTN8608-P8 Скачать руководство пользователя страница 156

Страница: 156 / 231

User Manual of Network Video Recorder

127

With the configured VCA detection, the NVR supports the VCA search for the behavior analysis, face capture,
people counting and heat map results.

10.1

People Counting

Purpose:

The People Counting is used to calculate the number of people entered or left a certain configured area and form

in daily/weekly/monthly/annual reports for analysis.

Steps:

Enter the

People Counting

interface.

Menu>VCA Search> People Counting

Select the camera for the people counting.

Select the report type to Daily Report, Weekly Report, Monthly Report or Annual Report.

Set the statistics time.

Click the

Counting

button to start people counting statistics.

Figure 10. 1

People Counting Interface

You can click the

Export

button to export the statistics report in excel format.

User Manual

Содержание LTN8608-P8








































































































































































































































Результаты поиска

Содержание LTN8608-P8

Отзывы:

OVS LTN8608-P8, Быстрый старт, Страница: 156 / 231

Результаты поиска

Содержание LTN8608-P8

Отзывы: