OVS LTN8608-P8 Скачать руководство пользователя страница 119

Страница: 119 / 231

User Manual of Network Video Recorder

You can click

to configure the smart settings.

Figure 6. 13

Smart Settings

Skip the Non-Related Video:

The non-related video will not be played if this function is enabled.

Play Non-Related Video at:

Set the speed to play the non-related video. Max./8/4/1 are selectable.

Play Related Video at:

Set the speed to play the related video. Max./8/4/1 are selectable.

Pre-play and post-play is not available for the motion event type.

Click

to search and play the matched video files.

(Optional) You can click

to filter the searched video files by setting the target characters, including the

gender and age of the human and whether he/she wears glasses.

Figure 6. 14

Set Result Filter

6.1.6

Playing Back by System Logs

Purpose:

Play back record file(s) associated with channels after searching system logs.

Steps:

Enter Log Information interface.

Menu>Maintenance>Log Information

Click

Log Search

tab to enter Playback by System Logs.

Set search time and type and click

Search

button.

User Manual

Содержание LTN8608-P8








































































































































































































































Результаты поиска

Содержание LTN8608-P8

Отзывы:

OVS LTN8608-P8, Быстрый старт, Страница: 119 / 231

Результаты поиска

Содержание LTN8608-P8

Отзывы: