Ovislink OV915WVA Скачать руководство пользователя страница 60

Страница: 60 / 122

OV915WVA User Manual

the following standards: RFC3315, RFC3319, RFC3633, RFC3646,

RFC4075, RFC 4272 etc.



Enable RADVD:

The router advertisement daemon (RADVD) is run by Linux

or BSD systems acting as IPv6 routers. It sends router advertisement

messages, specified by RFC2461, to a local Ethernet LAN periodically and

when requested by a node sending a router solicitation message. These

messages are required for IPv6 stateless auto-configuration.



Enable MLD Snooping

: Multicast Listener Discovery Snooping (MLD

Snooping) is an IPv6 multicast constraining mechanism that runs on Layer 2

devices to manage and control IPv6 multicast groups. By analyzing received

MLD messages, a Layer 2 device running MLD Snooping establishes

mappings between ports and multicast MAC addresses and forwards IPv6

multicast data based on these mappings.

After finishing setting, click the

Save/Apply

button to apply the settings.

5.2.5

NAT

5.2.5.1

Virtual Servers

Firewall can prevent unexpected traffic on the Internet from your host on the LAN.

The virtual server can create a channel that can pass through the firewall. In that

case, the host on the Internet can communicate with a host on your LAN within

certain port range.

Choose

Advanced Setup > NAT > Virtual Servers

, and the following page

appears.

In this page, you are allowed to add or remove a virtual server entry.

To add a virtual server, do as follows:

Step 1

Click the

Add

button to display the following page.

Содержание OV915WVA






















































































































Результаты поиска

Содержание OV915WVA

Отзывы:

Ovislink OV915WVA, Руководство пользователя, Страница: 60 / 122

Результаты поиска

Содержание OV915WVA

Отзывы: