OV915WVA User Manual
Copyright @ 2016 OvisLink (Canada) INC All rights reserved
50
APN:
APN (Access Point Name) is used to identify the service type. Enter
the APN provided by your 3G/4G ISP.
Dial Number:
Enter the dial number provided by your 3G/4G ISP.
Idle time (in sec.):
If no traffic for the preset time, the 3G/4G will disconnect
automatically.
Net Select:
Select the 3G/4G network that is available.You may select
EVDO, WCDMA, CDMA2000, TD-SCDMA, LTE GSM, or Auto.
Dial on demand
: Within the preset minutes, if the modem does not detect
the flow of the user continuously, the modem automatically stops the 3G/4G
connection. Once it detects the flow (like access to a webpage), the modem
restarts the 3G/4G dialup.
Dail Delay (in sec.)
: The 3G/4G delays dial after the DSL is disconnected.
Default WAN Connection Select
: You can select DSL or 3G/4G from the
drop-down list.
WAN back mechanism
: The 3G/4G connection is backup for the DSL
connection.
–
DSL
: If the DSL is disconnected, the 3G/4G starts to dial.
–
IP connectivity
: If the system fails to ping the specified IP address, the
3G/4G starts to dial.
After finishing setting, click the
Apply/Save
button to save the settings.
You may also click the
auto setting
button to automatically configure the 3G/4G
connection.
After clicking the
Apply/Save
button, the following page appears.
If the 3G/4G network card is installed, you may click the button on the
Action
column
to establish or disconnect the 3G/4G connection.