Ovislink OV915WVA, Руководство пользователя, Страница: 108 / 122

OV915WVA User Manual
Copyright @ 2016 OvisLink (Canada) INC All rights reserved
104

Band: 2.4GHz or 5GHz.

Channel: Fill in the appropriate channel to correspond with your network
settings. All devices in your wireless network must use the same channel in
order to work correctly. This router supports auto channeling functionality.

Auto Channel Timer(min): Specifies the timer of auto channelling.

802.11n/EWC: Select disable 802.11n or Auto .

Bandwidth: Select the bandwidth for the network. You can select 20MHz in
Both Bands , 40MHz in Both Bands or 80M in 5G.

Control Sideband: If you select 20MHz in Both Bands or 20MHz in 2.4G
Band and 40MHz in 5G Band , the service of control sideband does not
work. When you select 40MHz in Both Bands as the bandwidth, the
following page appears. Then you can select Lower or Upper as the value
of sideband. As the control sideband, when you select Lower , the channel is
1~7. When you select Upper , the channel is 5~11.

802.11n Rate: Select the transmission rate for the network. The rate of data
transmission should be set depending on the speed of your wireless network.
You can select from a range of transmission speeds, or you can select
Auto
to have the Router automatically use the fastest possible data rate and
enable the Auto-Fallback feature. Auto-Fallback will negotiate the best
possible connection speed between the Router and a wireless client. The
default value is
Auto .

802.11n Protection: The 802.11n standards provide a protection method so
802.11b/g and 802.11n devices can co-exist in the same network without
“speaking” at the same time.

Support 802.11n Client Only: Only stations that are configured in 802.11n
mode can associate.

Multicast Rate: Select the multicast transmission rate for the network. The
rate of data transmission should be set depending on the speed of your
wireless network. You can select from a range of transmission speeds, or
you can select
Auto to have the Router automatically use the fastest
possible data rate and enable the Auto-Fallback feature. Auto-Fallback will
negotiate the best possible connection speed between the Router and a
wireless client. The default value is
Auto .

Basic Rate: Select the basic transmission rate ability for the AP.