y
System Time: You can manual key in the time and day, or get them automatically from NTP server.
The 9100MESH serial products are with RTC chip to keep date and time data. It can keep system
date and time data for 5 days.
y
Login Banner:
When you are satisfied with your changes, click Apply.
5.3 System Configuration – Operation Mode
At 9100MESH model, it adds a selection
item - Operation mode. You can set up
9100MESH as standard Access Point
function, or Gateway.
At AP mode, it virtually connects
wireless users to the host wired network.
The IP addresses for wireless devices
are typically assigned by the wired
network’s DHCP server. All wireless
devices connected to the AP are
configured on the same sub network as
the wired network interface and can be
accessed by devices on the wired
network.
If additional security for the wireless
network is desired (differentiating it from
the wired network to which it is
connected), or the wired network can not
provide enough IP to wireless devices,
you can set up device in gateway mode.
Unlike the AP mode that the wireless
clients get IP address from upstream
network equipment and is at the same
sub-network with wired
network interface.
Gateway mode provides
private IP address for the
wireless clients and is
different sub-network from
wired network interface.
Gateway mode takes
advantage of some built-in “router” function, such as the Network Address Translation (NAT) and
AirLive WH-9100-MESH User’s Manual
24
