__________________________________________________________________________________
__________________________________________________________________________
IPU 40285 Version E Jan 2013
8
Figure 7 Start up Screen Shot
5.3.
Communication between Imager and PC
5.3.1.
Click on the “load set up from imager” button.
5.3.2.
This will load up the imager communication configuration dialogue box. See Figure 8.
5.3.3.
Selecting Auto Detect, will check the ports and confirm they can be connected to. Ensure
that a port from the available ports box is selected and then click OK.
5.3.4.
Alternatively select a port from the available port box and click OK.
5.3.5.
To test if as port works, select it from the available port box and click on test port
5.3.6.
Figure 8
Communication dialogue box.
