5
will connect networked devices, such as PCs, print servers, remote hard drives, and
anything else you want to put on your network. If you connect this product with the Hub (or
Switchboard) correctly, the Router’s corresponding LED and the Hub’s (or the
Switchboard’s) must be illuminates.
POWER:
Power inlet.
RESET (WPS):
The Reset Button has two functions, WPS and Factory Default. When
press it less than 2 seconds, it is WPS function and the WPS LED will flash two minutes,
than 6 seconds, the router will restore to factory default.
2.3 Typical install
1. Make sure all devices, including your PCs, modem, and Router, are powered down.
2. Using an Ethernet network cable, connect the LAN or Ethernet network port of the cable
or DSL modem to the Router’s WAN port.
3. Power on the cable or DSL modem, and power on the PC you wish to use to configure
the Router.
4. Connect the included power adapter to the Router. And connect the other end of the
adapter to an electrical outlet.
