21
4.3 Wireless Setup
4.3.1 Basic
This page is used to configure the parameters for wireless LAN clients which may connect to
your Access Point. Here you may change wireless encryption settings as well as wireless
network parameters.
Disable Wireless LAN Interface:
Check this box to to disable the Router’s wireless
features; uncheck to enable it.
Band
：
Select one mode from the following. The default is 2.4GHz B+G+N mode.
Mode:
Support AP, Client, WDS and AP+WDS mode.
Network Type:
This type is only valid in client mode.
SSID
：
SSID (Service Set Identifier) is the unique name of the wireless network.
Channel Width
：
Select the channel width from the pull-down list. The default setting is
automatic, which can adjust the channel width for your clients automatically.
Channel Number:
Indicates the channel setting for the router.
Broadcast SSID:
Select “Enable” to enable the device's SSID to be visible by wireless
clients. The default is enabled.
WMM:
It will enhance the data transfer performance of multimedia data when they’re
