16
Band:
Support 802.11B, 802.11G, 802.11N and mixed. Please choose its band according
to your clients.
Mode:
Support AP, Client, WDS and AP+WDS mode.
Network Type:
This type is only valid in client mode.
SSID:
Service Set Identifier, it identifies your wireless network.
Channel Width:
Select 40MHz if you use 802.11n or 802.11n mixed mode, otherwise
20MHz, it is default value.
ControlSideband:
It is only valid when you choose channel width 40MHz.
Channel Number:
Indicates the channel setting for the router.
Enable Mac Clone:
Enable or disable MAC clone option. (You can use the "Mac Clone"
button to copy the MAC address of the Ethernet Card installed by your ISP and replace
the WAN MAC address with this MAC address.)
Step 6 Wireless Security Setup
Secure your wireless network by turning on the WPA or WEP security feature on the router.
This section you can set WEP and WPA-PSK security mode.
The following picture shows how to set the WEP security.
