7. CONTROLLER (TRANSMITTER) AND RECEIVER SYNCHRONIZATION
Insert and connect the drone’s battery.
Close the battery cover and turn on your X-Bee 5.2 by
moving the Power switch on the bottom of the housing.
Turn the controller on.
Move the left stick forward, and then backward. The
controller emits a beep sound and the drone’s LEDs starts to
glow steadily indicating correct synchronization.
8. DRONE’S ENGINES CALIBRATION
Place your X-Bee Drone 5.2 on a flat and even surface. Move both sticks to the upper left
corner positions, as shown in the picture. Hold these positions for 5 seconds. The drone's
LEDs will blink several times, and then they will start to glow steadily. Now, you can release
the sticks - the drone is ready to fly.
9. STARTING / STOPPING THE ENGINES
In order to start the engines, move the left stick to the
lower left corner, and the right stick to the lower right
corner.