When the drone’s LEDs start flashing, it
means that the battery power is low. In this
case, please land your device and
replace the battery.
If no action is taken, the drone lands automatically when
the battery power is critical (in the place of its current
position).
12. CAMERA INSTALLATION / DEINSTALLATION
In order to attach a camera to the drone,
slide it into the guides and push towards
the front of the drone (as shown in the
picture) until you hear a snap sound.
Plug the camera cable to the port placed
on the drone’s housing.
Now, the camera is ready to use.
In order to unmount the camera, unplug
its cable from the drone’s port, move the
camera toward the back of the drone,
and then remove it from the guides.
13. PROPELLER INSTALLATION
In order to fly properly, the drone needs correct installation of the propellers. It is shown in
the following picture:
.
Each propeller is marked. The corresponding marking is also indicated on the protective faceplate of
the drone’s LEDs.