10400287-002 03/2011
©2010-11 Overland Storage, Inc.
Page 7 of 7
http://support.overlandstorage.com
You can get additional technical support on the Internet at the
Overland Storage Support web page
, or by contacting Overland Storage using
the information found on the
page on our web site.
Quick Start Guide
SnapServer Manager Procedure
1.
Launch SSM.
SSM discovers all SnapServers on its local network segment and displays their server names, IP addresses, and
other status information in the main console. If you do not have a DHCP server, there might be a delay before the
server appears on the network.
NOTE: To distinguish multiple SnapServers, you may need to find their default server names as explained in the previous
procedure.
2.
If using a DHCP server, proceed to
; otherwise, assign an
IP address
to the new server.
a.
In SSM, right-click the
server name
.
b.
Select
Set IP Address
.
c.
Enter an IP address and a subnet mask, then click
OK
.
3.
In SSM, right-click the server name and select
Launch Web Administration
.
4.
Log into the
Web Management Interface
.
In the login dialog box, enter
admin
as the user name and
admin
as the password, then click OK.
5.
Complete the
Initial Setup Wizard
.
Your N2000 is ready to be configured for your specific environment and needs.
Step 7: Additional Information
User Guides
For detailed information on configuring your SnapServer N2000,
refer to the
SnapServer Administrator’s Guide for GuardianOS
6.5,
the
SnapServer Setup Guide for GuardianOS 6.5,
or the
GuardianOS 6.5 Release Notes
.
They are
available online
at:
http://support.overlandstorage.com/support/
snapserver-nas.htm
Click one of the links on the right side of the page to view the
appropriate GuardianOS document.
Warranty and Technical Support
For warranty and technical support information, see our
web page:
http://www.overlandstorage.com/company/contact-us/
index.aspx
