10400287-002 03/2011
©2010-11 Overland Storage, Inc.
Page 1 of 7
Quick Start Guide
SnapServer
®
N2000
This document describes how to unpack a SnapServer N2000
from Overland Storage and install it into a four-post, 32-inch
deep, 19-inch (EIA-310) rack. The N2000 comes with four empty
drive slots and the remaining eight slots filled with drive blanks.
It must be populated with four to twelve drives to be operational.
WARNING: To reduce the risk of electric shock or damage to
equipment, always remove any power cords while working with
the unit.
AVERTISSEMENT: Pour réduire le risque de choc électrique ou
endommagement de l'équipement, retirez toujours les cordons
électriques en travaillant avec l'appareil.
CAUTION:
While working with the unit, observe standard
Electrostatic Discharge (ESD) precautions to prevent damage to
micro-circuitry or static-sensitive devices.
Step 1: Activate Your Warranty!
It is
essential
that you activate your warranty. Technical and
warranty support are
not available
until it is done:
1.
Note the product
serial number
from the box label or on the
product.
2.
Go to the
Overland Storage
web site:
http://www.overlandstorage.com/
3.
Select
Service & Support > My Products
.
4.
At the
e-mail address
and
password
, and click
GO
.
5.
Click
Register New Product
.
6.
Fill in the information and click
Submit
.
IMPORTANT: Within three business days, you’ll receive an e-mail
from Overland with your warranty certificate. Follow the
instructions included to complete the process.
Step 2: Install Unit in Rack
WARNING: Use care during rack installation or removal to
prevent accidental tipping of the rack causing damage or
personal injury.
AVERTISSEMENT: soyez prudent lors de l'installation ou de
l'enlèvement du support afin d'empêcher le renversement
accidentel de la crémaillère, pour éviter dommages et blessures.
Enter
Enter
*1
04002
87
00
2*
