Over Armour Offroad KAW-TERYX-FC01, Инструкции по установке и уходу

Страница: 3 / 7

8. Now move to the front of the enclosure and install two adhesive Velcro strips on either
side of the windshield. Pull the sides of the windshield down and mark the position of the
strips. Pull back the windshield and place the 10” adhesive strip at the top and the 15”
strip below that. Now pull the windshield tight and connect the Velcro tab to the adhesive
strips. You may have to detach and adjust windshield to center or door zippers may be
difficult to close.
9. Next, pull down on the bottom of the windshield and attach to the 45” adhesive strip
pictured in fig. A. Then take the vent panel and place in the middle of the windshield as
shown in fig. F below. When installing vent panel begin by attaching across top then pull
down and attach in the middle
then work your way side to side attaching to the Velcro on
the hood.
Fig. E
Fig. F