manualshive.com logo in svg

oventrop Regtronic RX, Инструкция по установке и эксплуатации

Поделиться
Скачать
oventrop Regtronic RX Скачать руководство пользователя страница 36

en

36

 Function block

In addition to the pre-defi ned optional functions, func-
tion blocks consisting of thermostat functions, timer 
and differential functions are available. With the help 
of these function blocks, further components, resp. 
functions can be controlled.
To each function block, sensors and free relays can be 
allocated. Sensors already in use can be allocated again 
without impeding their control functions.
Within a function block the functions are intercon-
nected (AND gate). This means that the conditions 
of  all  the  activated  functions  have  to  be  fulfi lled  (e. 
g. thermostat and timer) for switching the allocated 
relay. As soon as one condition is not fulfi lled, the relay 
is switched off.

 Thermostat function

The switch-on condition for the thermostat function 
is  considered  fulfi lled  when  the  adjusted  switch-on 
temperature (

Th(x)on

) is reached.

It is considered unfulfi lled when the adjusted switch-
off temperature (

Th(x)off

) is reached.

Allocate the reference sensor in the 

Sensor

 channel.

Adjust the maximum temperature limitation / thermo-
stat function for afterheating with Th(x)off > Th(x)on 
and the minimum temperature limitation with Th(x)on 
> Th(x)off. 
The temperatures cannot be set to an identical value.

 

D

T function

The relay allocated to the function block is switched 
on as soon as the adjusted switch-on temperature 
difference (

Δ

T(x)on

) is reached. It is switched off as 

soon as the adjusted switch-off temperature differ-
ence (

Δ

T(x)off

) is reached.

 Timer

The relay allocated to the function block will be 
switched on when the operation time is within the 
adjusted time frame.

Reference relay

Up to 5 reference relays can be selected. 
Whether the reference relays are to be switched in 
series (AND) or in parallel (OR) can be adjusted in 
the 

Mode

 channel.

OR mode
If at least one of the reference relays is active, the 
switch-on condition for the function block is consid-
ered  fulfi lled. The  switching  conditions  of  all  other 
activated functions of the function block have to be 
fulfi lled as well.
AND mode
If all reference relays are active, the switch-on condi-
tion for the function block is considered fulfi lled. The 
switching conditions of all other activated functions of 
the function block have to be fulfi lled as well.

     

Function

Thermostat a

Tha- S3*

Thb-S4

Timer

R3*

RX

D

T-S3>S4*

Thermostat b

D

T function

Timer

Reference relay

Reference relay

1. in parallel (OR)

2. in series (AND)

Reference relay

Reference relay 1

Reference 

relay 1

Reference relay 2

Reference 

relay 2

Reference relay 3

Reference 

relay 3

Reference relay 4

Reference 

relay 4

Reference relay 5

Reference 

relay 5

* exemplary selection, sensors and relays can be allocated freely

Relay

Содержание Regtronic RX





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды