5/36
Safety notes
"Regtronic RD-W"
2.3 Residual dangers
The following
residual dangers
for persons
and property exist during installation and
operation:
WARNING
Danger to life due to electric
shock!
•
Opening of the controller casing
and all electrical connections must
only be carried out by a
qualified
electrician
.
•
The following
5 safety
regulations
must be observed
during installation and cabling:
- Disconnect
- Protect against accidental
restart
- Check that no voltage is
present
- Earth and short-circuit
- Cover adjacent live parts
•
Please make sure that the
controller can be disconnected
from the power supply with an all-
pole disconnecting device (plug/
socket or 2-pole circuit breaker)
•
The local safety directive must be
observed.
•
Installation must only be carried
out in dry indoor areas.
•
The low voltage connections
(e.g. sensor connections) must
not be mixed up with the 230 V
connections.
•
Newly installed controllers must
only be energized once cabling of
all system components has been
carried out.
•
Completely disconnect the
controller from the power supply
before
removing
any connected
system components (e.g. for
maintenance and repair).
CAUTION
Risk of burns due to hot
components and pipework!
A modification of the parameter settings
may lead to very high flow temperatures
in the supply riser. There is a risk of
burns from hot surfaces.
•
Wear safety gloves during
installation and maintenance, if
required.
•
When installing a new heating
system, the pipework has to be
insulated.
Содержание Regtronic RD-W
Страница 35: ......