Technical description
“Aktor MH CON B (ENOCEAN)”
5/12
The wireless actuator supports two variants for radiator control according to
the EnOcean radio profile “EEP A5-20-01”:
•
The actuator activates the radiator valve (valve lift 0-100%) according to
the instructions of an external Smart Home System.
•
The actuator receives an actual and a nominal temperature value
(0-40°C) for a room from an external Smart Home System. The actuator
uses its
internal
control function for the calculation of the valve lift.
The wireless actuator should be operated in this mode
.
No
Function
Condition
Effect
1
Adaptation
Press “teach in” button (A)
briefly < 3 sec.
Connection to Smart Home Sys-
tem, drive shaft (S) closes the valve
2
Installation
Hold “teach in” button (A)
> 3 sec.
Drive shaft (S) closes the valve
3
Removal
Hold “teach in” button (A)
> 3 sec.
Drive shaft (S) opens the valve;
actuator can be removed from
the valve more easily
4
Frost
protection
Actual temperature below
6°C
Drive shaft (S) opens the valve up
to the frost protection position
5
Factory
setting
See chapter 7
Drive shaft (S) retracts, valve fully
open, assignment between actua-
tor and Smart Home Sys. gets lost
6
Emergency
operation
Failure of
Smart Home System
Control is carried out by the
actuator sensor (21°C)
7
Valve protection
No valve activation for 14 days
Valve opens and closes automatically
No
Function
Effect
1
Summer mode
Transmission interval increased to 30 minutes
2
Service function 1
“Open valve”
Valve is controlled remotely and is opened
independent of control operation
3
Service function 2
“Close valve”
Valve is controlled remotely and is closed
independent of control operation
4
Service function 3
“Carry out calibration”
A calibration is carried out by the actuator
remotely and independent of control operation
5
Communication test
See paragraph 3.4
Additional functions
(must be supported by the Smart Home System)
Main functions for control operation