en
Installation
Configuration
Data expor
t / configuration
W
eb interface
Eliminating er
rors
28
Indications
7
Advanced configuration
7.1
Accessing the Datalog CS-BS-1 over the Internet with Oventrop
Portal (www.portal.oventrop.com)
In order to access the Datalog CS-BS-1 over the Oventrop Portal server, proceed
as follows:
Î
In the main menu
Device Config
, select the sub-menu
Remote Access
.
Î
Note down the alphanumeric 8-10-digit code (Access Token) indicated on the
Remote access over Internet
tab or read the one from the label.
Î
Enter www.portal.oventrop.com into the address bar of the browser and click
Register
.
Î
Wait for the confirmation e-mail to arrive.
Î
Click
Claim a new device
.
Î
Enter the alphanumeric 8-10-digit code (Access Token).
As soon as the remote access over Internet has been enabled, the Datalog CS-BS-1
checks every 60 min if a connection to the Oventrop Portal server exists. If Ov-
entrop Portal does not answer, the Datalog CS-BS-1 will restart. After the restart,
the time begins running from 0 on in
time since last restart
. A restart can take
up to 90 s.
7.2
Network configuration
The network configuration determines where the Datalog CS-BS-1 obtains its IP
information.
There are 2 different settings possible for the network configuration:
• Dynamic (DHCP)
: The IP information is automatically assigned to the Datalog
CS-BS-1 by the DHCP server.
• Static
: The user manually assigns date and time information to the Datalog
CS-BS-1.
Note
Consult the system administrator before changing the factory settings!
In order to configure the network configuration, proceed as follows:
Î
In the main menu
Device Config
, select the sub-menu
Network
.
Î
In the
LAN configuration mode
dropdown menu, select the desired value.
Î
Click
Save configuration.
The message
Configuration saved successfully!
appears.
The menu item
IP Recovery
can be used for automatically retrieving a new IP
address for the DL2 in the case that the previous one is lost. In order to adjust the
automatic IP address configuration, proceed as follows:
Î
In the
IP Recovery
menu item, select
Yes
.
Î
Click
Save configuration
.
The message
Configuration saved successfully!
appears.
Î
Restart the device.
The Datalog CS-BS-1 checks every 15 min if an IP address is assigned. If no IP ad-
dress has been found after 3 attempts, the Datalog CS-BS-1 will restart. After the
restart, the time begins running from 0 on in
time since last restart
. A restart
can take up to 90 s.
