12
Illustr. 10: Push tightening sheet (a) “upwards”
4. Hang foot rail with plastic caps into the mounting rail.
For this purpose, the tightening sheet (a) has to be
pushed upwards.
Illustr. 11: Position foot rail in the mounting rail
Illustr. 12: Position foot rail in the mounting rail
Please make sure that no humidity may penetrate
the vacuum tubes/collector housing. Do not install the
collector during humid conditions or in rain.
5. Hang collector housing into the mounting rail. For this
purpose, the tightening sheet (c) has to be pushed
upwards.
Illustr. 14: Push tightening sheet (c) “upwards”
Illustr. 15: Position collector housing in the mounting rail
Illustr. 16: Push tightening sheet (c) “downwards”.
Tighten both M8 screws firmly.
Illustr. 13: Push tightening sheet (a) “downwards”.
Tighten both M8 screws firmly.
(a)
(b)
➟
(a)
➟
(c)
(d)
➟
(c)
➟
(c)
(d)
Illustr. 8: Roof hook “bottom“
(a)
(b)
