2 8
TRM138
9.
MARKING AND PACKING
9.1. At manufacturing, the following information is marked on the TRM138:
– instrument’s type and version;
– accuracy rating;
– manufacturer;
– manufactured date;
– measuring instrument type approval mark;
– compliance mark;
– instrument’s power supply voltage and power demand;
– bar code.
9.2. The instrument is packed as per GOST 9181 74 in market container made of corrugated
board.
10. TRANSPORTATION AND STORAGE
10.1. The instrument shall be transported packed at a temperature from –25 to +55°C and
relative air humidity not higher than 95% (at +35°C).
10.2. Transportation is allowed by all enclosed means of transport.
10.3. At air transportation the instrument shall be placed in heated sealed compartments.
10.4. The instrument shall be stored packed in enclosed storage facilities at a temperature
from –25 to +60°C and relative air humidity not higher than 95% (at +35°C). Air in the facility shall
not contain aggressive vapors and gases.
11. DELIVERY LIST
TRM138 instrument
1 ea.
Fasteners
2 ea.
Passport
1 ea.
Operation manual
1 ea.
Guarantee card
1 ea.
12. WARRANTY
12.1. The manufacturer guarantees compliance of the instrument to the Technical Specifications
requirements provided that the customer observes the operation, transportations, storage and
installation conditions.
12.2.
The warranty period is of 24 months from the day of sale.
12.3. In the event of malfunction of the instrument within the warranty period at observance
of the operation, transportation and storage regulations by the customer, the manufacturer shall
repair the instrument free of charge.
12.4.
To send the instrument for repair the following is required:
– fill in the Repair Coupon in the Guarantee Card;
– put the filled Guarantee Card in the box with the instrument;
– mail or deliver the box to the address:
2, 1st Veshnyakovskiy Prd., 109456, Moscow, Russia
Tel.: (495) 7424845, email: [email protected]
ATTENTION!
1. The Guarantee Card is not valid without the day of sale and the seller’s stamp.
2. Do not put fasteners in the box.
Section 912
Содержание TPM138
