background image

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the

product.

• Handle the tempered glass with caution! Improperly handling the glass can cause it to break 

   suddenly in small pieces (never in pointed fragments).

• You will need at least two people to install this unit properly. 

6

 

• 

OVE is not responsible for any damage to the unit or personal property caused by improper 

  installation. If you disregard instructional warnings, you will void your warranty and possibly 

  deal with water damage.

 

CAUTION

• 

Carefully remove product from packaging and keep packaging until installation is complete.

• Inspect all parts for damage; if there is damage to the unit prior to installation, please contact 

   your distributor.

• Install the shower on a floor that is level and able to accommodate the weight of the unit and 

   an occupant.

• Please, consult local building codes and compliance standards prior to installation and ensure 

  conformity.

WARNING

Before beginning assembly of product, make sure all parts are present. Compare parts with  package 

contents list and hardware contents list. If any part is missing or damaged, do not attempt to 

assemble the product.

Estimated Assembly Time: Shower tray (60 min), glass panels (60min).

Tools Required for Assembly (not included):

Screwdriver, Drill, 1/16” & 1/8” Drill bits, Silicone, Rubber mallet, Tape measure, Level, 

Adjustable tool, Pencil, Heavy duty cutter, Safety glasses

   

 

 

PREPARATION

Содержание JERSEY















Отзывы: