INSTALLATION INSTRUCTIONS
STEP E
1. Using a cutter, remove exposed rubber strips where the glass support brackets (L) are to be installed.
2. Place rear part of bracket (L) and one rubber gasket (FF) centered in the notch as illustrated and mark
location of hole to drill on shower base. Remove glass support bracket (L) and rubber gasket (FF).
Drill a hole in the shower base using the drill.
3. Add a drop of silicone to the drilled hole; Put back the rear bracket and the rubber seal and tighten using the
screw (EE).
4. Place the front bracket and the rubber seal and tighten with fixing screw (GG) using the Allen key (JJ).
5. Cut the vertical rubber track (G) to size and place it on the edge of fixed glass panel.
2
3
1
4
EE
ø 3
FF
GG
L
CUT
G
5
11
