13
1-2.
Ensure the base and shower frame are leveled. Mark the position of the holes of the wall tracks (E) on the
wall.
3.
Remove the shower frame.
4-5.
Drill pilot holes in the marked locations with a ø1/4” (6mm) drill bit. Insert the wall anchors (AA) using a
rubber mallet until the wall anchors are flush with the wall.
6.
Replace the whole shower frame onto the base.
WALL TRACK INSTALLATION
ø1/4”
6 mm
B
E
E
3
4
1
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
AA
5
6
2
