Ovation Grid-Lok, Руководство по установке

Страница: 20 / 26

CHAPTER 7
Adjustments and settings
18 Grid-Lok Installation Manual Issue 1
Adjusting
the table
flow control
valve To adjust the air control regulator, use the following procedure:
1. Ensure the operator interface is switched to
Semi-Automatic
2. Release the locking nut on the air control regulator (labeled 1)
3. Adjust the air control regulator fully clockwise cutting off the air
supply to the tooling modules.
4. Adjust the air control regulator one turn anti-clockwise.
5. Press the
Set button on the operator interface.
6. If all the pins on the tooling modules do not raise fully, press the
Reset! button on the operator interface and repeat Steps 4 and 5.
7. If all the pins on the tooling modules raise fully, turn the air
control regulator a further half turn anti-clockwise and secure the
locking nut.
8. Press the
Reset button on the operator interface.
NOTE Adjustment of the air control regulator may be required when
changing the amount of tooling modules used. I
It is important to adjust the flow control valve so that all the pins
rise smoothly