Ovation Grid-Lok, Руководство по установке

Страница: 14 / 26

CHAPTER 5
Connecting up
Locating and fitting pneumatic connectors
12 Grid-Lok Installation Manual Issue 1
Air supply
and power
cable to
controller Mount the Regulation and bracket to the machine in location
shown. Locate the Pneumatics chamber, using the 8mm tube and Y
connection supplied, remove the tube from the Machine regulator
and replace with tube provided, connecting the Machine regulator
to the Grid-Lok regulator. If the air tube used is 10mm then used the
adapter supplied
Connect the power supply cable to the Aux Power Supply box, and
route to the 411_CTL control box located in the front middle
compartment.
Air
24v