Ovation Grid-Lok, Руководство по установке

Страница: 17 / 26

Issue 1 Grid-Lok Installation Manual 15
Connect the 4mm twin tube from the Control Box to each of the 4
table as below. Ensure that the tube with the grey strip is connected
to the Red fitting and red distribution bar on the table.
1. Remove the OEM CM602 table from the machine and replace with
table assembly supplied in the Grid-Lok
TM
kit
2. Ensure that the Distribution bar Air connections are at the back
when sliding the table into the machine
3. Once the tables are in the machine, connect the tooling modules
using 4mm pneumatic “curly” pipe to the Pneumatic Distribution bar.
The RH bar (red connectors) on the distribution bar connects to the
connection (red sleeve) of the tooling module.
3. Pneumatic cables remain connected to modules when not in use.
Manifold to
modules
Pin Up
Connections
Table A1
Table A2
Table B1
Table B2
CHAPTER 5
Connecting up