Manual Issue: 1-2
Ovation Systems Ltd.
Page 6
www.ovation.co.uk
Time-Lapse DVD Recorder
User Guide
5 Loading Blank DVD Disks
1 Power up the MultiBurner by pressing the AfterBurner’s “DVD” button.
NB:
When the “DVD” button is pressed for the first time, the system checks each
MultiBurner DVD drive in turn to ascertain the status of each tray and the illuminates
the Drive Select Switch accordingly. This operation takes up to 60 seconds and
should not be interrupted.
2 Press the required MultiBurner Drive Select Switch to power-up the drive and to put
the drive in Local Mode. The Drive Select Switch now flashes brightly and the Drive
LED lights. See Figure 2 for the location of the Drive Select Switch and Drive LED
3 Open the DVD drive tray by pressing the drive eject button (See Figure 2).
4
Place a new (blank) DVD disk the open tray and push the tray to close.
5 Press the Drive Select Switch again to exit Local Mode.
6 Repeat for each DVD drive as necessary.
TIP
2
A blank disk can also be loaded into the AfterBurner’s main DVD drive making a
total of 8 disks.
